The effect of different hybrid rigid internal fixation techniques on the postoperative stability following a mandibular advancement using a bilateral sagittal split ramus osteotomy: A retrospective three-dimensional comparative study.

OBJECTIVE: To three-dimensionally evaluate post-operative mandibular stability following bilateral sagittal split ramus osteotomies between hybrid and non-hybrid rigid internal fixation techniques. MATERIALS AND METHOD: Seventy adults with skeletal class II deformity who underwent bilateral split sagittal osteotomy with mandibular advancement were included. Patients were divided into four groups based on their fixation techniques: hybrid technique (HT) groups I, II, and IV received a 4-hole 2 mm miniplate with either a bicortical screw (BS), additional 2 mm 4-hole miniplate, or two-hole miniplate, while non-HT group III received a 4-hole 2 mm miniplate with four mini-screws (MS). Measurements were taken pre-operatively (T0), immediately postoperatively (T1), and ≥1 year after surgery (T2) using 3D Slicer software. RESULTS: Age, sex, and follow-up period did not correlate significantly with postoperative relapse or stability. Significant differences were observed in the advancement on the right side between groups II, III, and IV and on the left side between groups I, III, and IV. However, the type of surgical intervention showed no significant effect on postoperative relapse and stability. All groups of fixations showed satisfactory stability with irrelevant relapse (< 2 mm or 2°). CONCLUSION: The study demonstrated satisfactory and comparable stability among different fixation groups on patients undergoing mandibular advancement following bilateral split sagittal osteotomy. The results highlighted the importance of considering the degree of advancement when planning orthognathic surgery and managing postoperative outcomes.

A comparison of maxillofacial growth in Chinese children with isolated cleft palate treated with two different palatoplasty techniques without relaxing incisions: a preliminary study.

OBJECTIVE: To assess the maxillofacial growth of patients with isolated cleft palate following the Sommerlad-Furlow modified technique and compare it with the effect of the Sommerlad technique. STUDY DESIGN: A Retrospective Cohort Study. METHODS: A total of 90 participants, 60 patients with non-syndromic isolated soft and hard cleft palate (ISHCP) underwent primary palatoplasty without relaxing incision (30 patients received the Sommerlad-Furlow modified (S-F) technique and 30 received Sommerlad (S) technique). While the other 30 were healthy noncleft participants with skeletal class I pattern (C group). All participants had lateral cephalometric radiographs at least 5 years old age. All the study variables were measured by using stable landmarks, including 11 linear and 9 angular variants. RESULTS: The means age at collection of cephalograms were 6.03 ± 0.80 (5-7 yrs) in the S group, 5.96 ± 0.76 (5-7 yrs) in the S-F group, and 5.91 ± 0.87 (5-7 yrs) in the C group. Regarding cranial base, the results showed that there were no statistically significant differences between the three groups in S-N and S-N-Ba. The S group had a significantly shortest S-Ba than the S-F & C groups (P = 0.01), but there was no statistically significant difference between S-F and C groups (P = 0.80). Regarding skeletal maxillary growth, the S group had significantly shorter Co-A, S- PM and significantly less SNA angle than the C group (P = < 0.01). While there was no significant difference between S-F & C groups (P = 0.42). The S group had significantly more MP-SN inclination than the C group (P = < 0.01). Regarding skeletal mandibular growth, there were no statistically significant differences in all linear and angular mandibular measurements between the three groups, except Co-Gn of the S group had a significantly shorter length than the C group (P = 0.05). Regarding intermaxillary relation, the S-F group had no significant differences in Co-Gn-Co-A and ANB as compared with the C group. The S group had significantly less ANB angle than S-F & C groups (P = 0.01 & P = < 0.01). In addition, there were no significant differences in all angular occlusal measurements between the three groups. CONCLUSION: As a preliminary report, Sommerlad-Furlow modified technique showed that maxillary positioning in the face tended to be better, and the intermaxillary relationship was more satisfactory than that in Sommerlad technique when compared them in healthy noncleft participants.

Impact of relaxing incisions on maxillofacial growth following Sommerlad-Furlow modified technique in patients with isolated cleft palate: a preliminary comparative study.

OBJECTIVE: To estimate the impact of relaxing incisions on maxillofacial growth following Sommerlad-Furlow modified technique in patients with isolated cleft palate. STUDY DESIGN: A Retrospective Cohort Study. METHODS: A total of 90 participants, 60 patients with non-syndromic isolated soft and hard cleft palate underwent primary palatoplasty (30 patients received the Sommerlad-Furlow modified technique without relaxing incision (S.F-RI group), and 30 received Sommerlad-Furlow modified technique with relaxing (S.F+RI group) with no significant difference found between them regarding the cleft type, cleft width, and age at repair. While the other 30 were healthy noncleft participants with skeletal class I pattern as a Control group. The control group (C group) was matched with the patient groups in number, age, and sex. All participants had lateral cephalometric radiographs at least 5 years old age. The lateral cephalometric radiographs were taken with the same equipment by the same experienced radiologist while the participants were in centric occlusion and a standardized upright position, with the transporionic axis and Frankfort horizontal plane parallel to the surface of the floor. A well-trained assessor (S. Elayah) used DOLPHIN Imaging Software to trace twice to eliminate measurement errors. All the study variables were measured using stable landmarks, including 12 linear and 10 angular variants. RESULTS: The mean age at collection of cephalograms was 6.03 ± 0.80 in the S.F+RI group, 5.96 ± 0.76 in the S.F-RI group, and 5.91 ± 0.87 in the C group. Regarding cranial base, the results showed no statistically significant differences between the three groups in S-N and S-N-Ba. While the S.F+R.I group had a significantly shortest S-Ba than the S.F-R.I & C groups (P = 0.01 & P < 0.01), but there was no statistically significant difference between S.F-R.I & C groups (P = 0.71). Regarding the skeletal maxilla, there was no significant difference between the S.F+R.I and S.F-R.I groups in all linear measurements (N-ANS and S-PM) except Co-A, the S.F+R.I group had significantly shorter Co-A than the S.F-R.I & C groups (P = < 0.01). While the angular measurement, S.F+R.I group had significantly less SNA angle than the S.F-R.I & C groups (P = < 0.01). Regarding mandibular bone, there were no statistically significant differences in all linear and angular mandibular measurements between the S.F+R.I and S.F-R.I.groups. Regarding intermaxillary relation, the S.F+R.I group had significant differences in Co-Gn-Co-A and ANB compared to the S.F-R.I & C groups (P = < 0.01). While there was no statistically significant difference in PP-MP between the three groups. CONCLUSION: As a preliminary report, the Sommerlad-Furlow modified technique without relaxing incisions was found to have a good maxillary positioning in the face and a satisfactory intermaxillary relationship compared to the Sommerlad-Furlow modified technique with relaxing incisions.

Two cleft palate simulators of Furlow double-opposing Z- palatoplasty: a comparative study.

PURPOSE: This study aimed to evaluate the efficiency of the porcine tongue for palatoplasty simulation compared to 3D-printed simulators and their surgical education role. MATERIALS AND METHODS: A total of 18 senior cleft surgeons participated in a palatoplasty simulation-based workshop conducted using porcine tongue simulators and 3D-printed simulators. This workshop consisted of a didactic session followed by a hands-on simulation session. Each participant independently used both simulators to perform Furlow double-opposing Z-plasty, which was assessed and scored by senior cleft surgeons using a scoring system including organizational flexibility and ductility, anatomical design simulation, proper incision, proper suturing, and convenience of operation. A paired t test was used for data statistical analysis and a P value < 0.05 was regarded as a statistically significant difference. RESULTS: All senior cleft surgeons strongly agreed that the simulation-based workshop was a valuable learning experience, and both simulators were useful and easy to manipulate (P = 1.00). The results of this comparative study showed that a porcine tongue palatoplasty simulator had an effectively significant difference in terms of organizational flexibility and ductility (P = 0.04), and suturing was better than the 3D-printed palatoplasty simulator (P < 0.01). There were no significant differences between the simulators regarding anatomical design simulation (P = 0.76) and incision simulation (P = 0.65). CONCLUSION: Both porcine tongue simulator and 3D-printed simulator have their unique strengths in surgical education for palatoplasty. Thus, the combined use of a porcine tongue and a 3D-printed cleft palate simulators are efficient as an educational model to practice Furlow double-opposing Z- palatoplasty. The porcine tongue simulators are superior in terms of organizational flexibility, ductility, and suturing simulators, while with the 3D-printed simulator, various palatoplasty techniques can be repeatedly practiced with better-simulated face and oral cavity.

Cone-beam computed tomographic analysis of maxillary sinus septa among Yemeni population: a cross-sectional study.

BACKGROUND: Maxillary sinus septa increase perforation risk of Schneiderian membrane during the sinus floor elevation (SFE). Cone Beam Computed Tomography (CBCT) allows for a more precise assessment of the septal position; thus, preoperative CBCT analysis is substantial to avoid possible complications. This study aims to investigate the 3D characteristics of the maxillary sinus septa based on CBCT images. To our knowledge, no study reported the CBCT-based investigation for the sinus septa among Yemeni population. MATERIALS AND METHODS: This is a retrospective cross-sectional analysis of 880 sinus CBCT images 440 patients. The septa prevalence, locations, orientations, morphology, and associated factors were analyzed. The effect of age, gender, and dental status on the sinus septa and the relationship between sinus membrane pathology and sinus septa were also analyzed. Anatomage (Invivo version 6) was used for CBCT images analysis. Descriptive and analytical statistics were performed, and a P-value < 0.05 was significantly considered. RESULTS: The maxillary sinus septa were found among 63.9% of patients and 47% of sinuses. The average septa height was 5.2 mm. 15.7% of patients had septa in the right maxilla, 18% in the left, and 30.2% in both. Gender, age, and dental condition had no influence on the presence of septa, and septa presence did not influence sinus membrane pathology. Many septa originated from the floor (54.5%), located in the middle (43%), with coronal orientation (66%) and complete configuration (58.2%). CONCLUSION: Based on our findings, the septa prevalence, locations, orientations, and morphology were significant and equivalent to the highest recorded in the literature yet. Thus, when sinus floor elevation is planned, CBCT imaging of the maxillary sinus is recommended for safe dental implantation.

Condylar positional changes and remodeling following bimaxillary anterior segment osteotomy with and without Le Fort I osteotomy: a three-dimensional comparative analysis.

OBJECTIVE: To evaluate 3D condylar displacement and long-term remodeling following the correction of bimaxillary protrusion by anterior segment osteotomy (ASO) with and without Le Fort I surgery. MATERIALS AND METHOD: This retrospective study included 32 adults with bimaxillary protrusion who underwent ASO alone (group 1) or with concomitant Le Fort I osteotomy (group 2). Subject's computed tomography scans at basic (T0), immediate postoperatively (T1), and at 1 year or more follow-up (T2) were collected. The condyle displacement was measured at superior-inferior, lateromedially, and anteroposterior surfaces, while condyle remodeling was measured at the superior, lateral, anterior, medial, and posterior surfaces. All 3D analyses were performed using 3D Slicer software (4.11.2). RESULTS: At T1, 52.7%, 86.7%, and 94.4% of condyles in group 1 were displaced inferiorly, laterally, and posteriorly, respectively, as well as 75%, 89.2%, and 53.5% of condyles in group 2, which had not fully returned to the original preoperative positions at T2. Condylar remodeling was observed in both groups at T2, and no significant difference was found in the overall condylar volume between T1 and T2 in both groups. Patients in group 2 exhibited significant bone resorption at both lateral and anterior surfaces compared to group 1 (P = 0.000 and 0.01, respectively). CONCLUSION: This study's results demonstrated that ASO is associated with a degree of condylar changes even if the posterior mandible is not osteomized. The positional changes vary between bimaxillary ASO alone and those with simultaneous Le Fort I osteotomy. However, both groups' condyle volume remained stable at the long-term follow-up.

Alveolar ridge preservation in post-extraction sockets using concentrated growth factors: a split-mouth, randomized, controlled clinical trial.

Aim: The aim of this clinical trial was to assess the impact of autologous concentrated growth factor (CGF) as a socket-filling material and its ridge preservation properties following the lower third molar extraction. Materials and methods: A total of 60 sides of 30 participants who had completely symmetrical bilateral impacted lower third molars were enrolled. The primary outcome variables of the study were bone height and width, bone density, and socket surface area in the coronal section. Cone beam computed tomography images were obtained immediately after surgery and three months after surgery as a temporal measure. Follow-up data were compared to the baseline using paired and unpaired t-tests. Results: CGF sites had higher values in height and width when compared to control sites (Buccal wall 32.9 ± 3.5 vs 29.4 ± 4.3 mm, Lingual wall 25.4 ± 3.5 vs 23.1 ± 4 mm, and Alveolar bone width 21.07 ± 1.55vs19.53 ± 1.90 mm, respectively). Bone density showed significantly higher values in CGF sites than in control sites (Coronal half 200 ± 127.3 vs -84.1 ± 121.3 and Apical half 406.5 ± 103 vs 64.2 ± 158.6, respectively). There was a significant difference between both sites in the reduction of the periodontal pockets. Conclusion: CGF application following surgical extraction provides an easy, low-cost, and efficient option for alveolar ridge preservation. Thus, the use of CGF by dentists during dental extractions may be encouraged, particularly when alveolar ridge preservation is required. Clinical trial registration: TCTR identification, TCTR20221028003.

Maxillary sinus volume and facial asymmetry after unilateral zygomaticomaxillary complex fracture reduction with 2, 3, and 4 fixation points: CBCT-based investigation.

PURPOSE: This study aimed to assess the maxillary sinus volume (MSV), Chronic Sinusitis incidence, and asymmetry of the zygomaticomaxillary complex (ZMC) following ZMC fracture surgery with various numbers of fixation points. MATERIALS AND METHODS: In a prospective non-randomized cohort, 50 adults with unilateral ZMC fractures who treated by open reduction and internal fixation (ORIF) between November 2019 and October 2021 were assigned to accomplish this study. They distributed into three groups as per fixation points (2, 3, or 4 Points). Preoperative (T1), Immediate postoperative (T2), and follow-up (T3) cone beam computed topography were analyzed using the Mimics software. The main measures were MSV and asymmetry indexes (ASI) of six paired bilateral anatomical landmarks (Orbital, Suprajugal, Jugale, Zygon, Maxillozygion 1, and Maxillozygion 2). RESULTS: MSV decreased significantly on the affected sides postoperatively in 2P and 3P groups, both in T2 and T3. Further, the T2-T3 comparisons showed a significant MSV change (p = 0.001). ASI reduced considerably to clinically tolerated levels (<3 mm) on landmarks near the fixation sites postoperatively. The ASI on the Zygon and Maxillozygion 1 landmarks showed significant changes among the three groups in both T2 and T3. Interestingly, only five cases had reported postoperative sinusitis symptoms. CONCLUSIONS: Although the MSV was changed among the different fixation point groups, the incidence of chronic sinusitis was uncommon. Bilateral asymmetry affected by number and position of the fixation points, fixation with 4 points provide more symmetry.

Development of postoperative velopharyngeal function in patients with cleft palate.

OBJECTIVE: Patients with a cleft palate often experience a velopharyngeal dysfunction known as velopharyngeal insufficiency (VPI). The purpose of this study was to examine the development of velopharyngeal function (VPF) following primary palatoplasty and the factors that are linked to it. METHODS: A retrospective study was conducted to examine the medical records of patients who had cleft palate, with or without cleft lip (CP ± L) and underwent palatoplasty at a Tertiary Affiliated Hospital between 2004 and 2017. Postoperative evaluation of VPF was conducted at two follow-up times (T1, T2) and was classified as either normal VPF, mild VPI, or moderate/severe VPI. The consistency of VPF evaluations between the two time points was then assessed, and patients were categorized into either the consistent or inconsistent group. The study collected and analyzed data on gender, cleft type, age at operation, follow-up duration, and speech records. RESULTS: The study included 188 patients with CP ± L. Out of these, 138 patients (73.4%) showed consistent VPF evaluations, while 50 patients (26.6%) showed inconsistent VPF evaluations. Among those with VPI at T1 (91 patients), 36 patients (39.6%) had normal VPF at T2. The rate of VPI decreased from 48.40% at T1 to 27.13% at T2, whereas the rate of normal VPF increased from 44.68% at T1 to 68.09% at T2. The consistent group had a significantly younger age at operation (2.90 ± 3.82 vs 3.68 ± 4.02), a longer duration of T1 (1.67 ± 0.97 vs 1.04 ± 0.59), and a lower comprehensive score of speech performance (1.86 ± 1.27 vs 2.60 ± 1.07) than the inconsistent group. CONCLUSIONS: It has been verified that there are changes in the development of VPF over time. Patients who underwent palatoplasty at a younger age were more likely to have confirmed VPF diagnosis at the first evaluation. The duration of follow-up was identified as a critical factor that affects the confirmation of VPF diagnosis.

An early microvascular training program of dental intern students and junior residents: a comparative prospective study.

BACKGROUND: Clinical instructional strategies and the climate in which teaching and learning take place have a significant impact on the quality of dental education. Therefore, this study aimed to evaluate the impact of early microsurgery training on the skills of dental intern students who are planning to join an oral and maxillofacial surgical field (DIS) as compared with junior residents within an oral and maxillofacial surgery department who had no microsurgery experience (JR). METHODS: A total of 100 trainees, 70 were DIS, while the other 30 were JR. The average age was 23.87 ± 2.05 years for DIS group and 31.05 ± 3.06 for JR group. All trainees attended a microsurgical course (theoretical and practical parts) for seven days within a Microvascular Laboratory for Research and Education of a university-affiliated tertiary hospital. Two blinded examiners had assessed the performance of trainees independently using a specific scoring system. The independent sample t-test was used to compare the effect of microsurgery training between DIS and JR groups. The significance level was set at 0.05. RESULTS: The DIS group had showed higher attendance rate than JR group (p < 0.01), with a lower absence score in DIS than JR groups (0.33 ± 0.58 vs. 2.47 ± 1.36). The total score of the theoretical test was significantly different between both groups (p < 0.01). In this context, the DIS group had revealed higher total score than JR group (15.06 ± 1.92 vs. 12.73 ± 2.49). In term of tissue preservation, there was a significant difference between both groups, with the DIS had better performance score than JR (1.49 ± 0.51 vs. 0.93 ± 0.59). Further, the practical exam score was significantly higher in DIS group than JR group (p < 0.01). CONCLUSION: Overall, the performance of dental intern students was favourably compared with junior residents in most aspects. Therefore, it is promising and essential for dental colleges to add a microsurgery course to the curriculum of dental intern students who plan to specialize in oral and maxillofacial surgery.

Three-dimensional radiographic assessment of different fixation methods stability after l-shaped osteotomy reduction malarplasty: A comparative retrospective study.

BACKGROUND: Reduction malarplasty (RM) is a common facial contouring procedure among Orientals. Currently, fixation methods selection and placement vectors are controversial. Therefore, this study aimed to evaluate the effect of different zygomatic complex fixation methods on surgical outcomes stability after RM. MATERIALS AND METHODS: In this retrospective study, 60 consented patients (120 operated zygoma) who met inclusion criteria were included. ITK-SNAP and 3D Slicer software were used to measure the displacement of the zygomatic complex using postoperative CTs (T1: one week and T2: six months). The region of interest included zygomatic body fixation methods (ZBFm), namely: two bicortical screws (2LS); an l-shaped plate with one bicortical screw (LPLS); an l-shaped plate with short-wing on the zygoma (LPwZ) and on the maxilla (LPwM), combined with zygomatic arch fixation methods (ZAFm), including Mortice-Tenon (MT); 3-hole plate (3HP); and short screw (SS). ANOVA test was used to compare the displacement values among ZBFm/ZAFm combinations. RESULTS: The 2LS and LPLS groups showed lower displacement than the single l-shaped plate (P< 0.001, P = 0.001), which performed better when the short-wing was fixated on the maxilla (0.9 ± 0.4 mm and 1.2 ± 0.6 mm respectively). CONCLUSION: After RM, the two-bridge fixation methods (2LS and LPLS) provide better stability than the single l-shaped plate. All ZAF methods showed similar stability when combined with 2LS or LPLS as zygomatic body fixation methods.

Evaluation of Postoperative Outcomes in Two Cleft Palate Repair Techniques without Relaxing Incisions.

BACKGROUND: A modified palatoplasty was established by incorporating the designs of both Sommerlad and Furlow techniques in addition to a novel incision on the medial pterygoid plate's surface, named the Sommerlad-Furlow modified technique. Thus, this study aimed to evaluate the clinical and functional outcomes of the Sommerlad-Furlow modified technique against an accepted standard, the Furlow technique. METHODS: A retrospective review was conducted for 212 consecutive nonsyndromic cleft palate patients who underwent Sommerlad-Furlow ( n = 106) and Furlow ( n = 106) repairs without relaxing incision on the hard palate between 2011 and 2016. The success of surgical procedures was estimated by the rate of postoperative fistula, speech outcomes, and velopharyngeal insufficiency (VPI)-related quality of life. The demographic and surgical data, including sex, age, cleft type, cleft width, and follow-up period were recorded. RESULTS: There was no statistically significant difference between the two treatment groups regarding demographic and surgical data, except the cleft width ( P < 0.001). The incidence of the fistula was 7.5% and 6.6% after the Sommerlad-Furlow and Furlow procedures, respectively. The two groups showed no significant differences in speech outcomes, and adequate velopharyngeal function was found in 84% and 82.1% in Sommerlad-Furlow and Furlow procedures, respectively. Besides, the rate of severe VPI was slightly lower in Sommerlad-Furlow (0.9%) than in Furlow (2.8%) procedures. Moreover, an adequate VPI-related quality of life was found in 80.4% of the Sommerlad-Furlow group and 78.6% of the Furlow group. CONCLUSION: The Sommerlad-Furlow technique has obtained acceptable postoperative outcomes and could be a choice for cleft palate repair, especially in wider clefts. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.

Cupid's Bow Leveling and Preservation of Lip Height and Width: A Modified Rotation-Advancement Technique.

BACKGROUND: Several methods for cleft lip repair have been developed over time, with no clear method considered the standard. In the authors' department, the use of a modified rotation-advancement technique rather than the traditional rotation-advancement technique in unilateral complete cleft lip repair has increased over the past decade. This study aimed to determine which technique provides better outcomes. METHODS: This retrospective study was conducted by analyzing the preoperative and postoperative aesthetic nasal and labial anthropometric measurements of the frontal and basal views of 213 consecutive patients treated between October of 2013 and June of 2019. A total of 141 participants were treated with the traditional rotation-advancement technique, and 72 with the modified rotation-advancement technique. The inclusion criteria were nonsyndromic unilateral complete cleft lip repair with high-resolution, good-quality photographs; no presurgical nasoalveolar molding; no revision in the lip or nose areas; and at least 1 year of follow-up. RESULT: Patients who received the modified rotation-advancement technique had significantly improved Cupid's bow position and orientation ( P < 0.02 and P < 0.01, respectively) and enhanced vertical lip height symmetry ( P < 0.01) while preserving the lip width. The columellar length ( P < 0.03) and angulation ( P < 0.045) were also significantly improved, with enhanced nostril inclination in this group ( P < 0.06). CONCLUSIONS: According to the findings of the current study, modified rotation-advancement technique assisted surgeons in improving symmetrical leveling of the Cupid's bow and significantly aided in correcting lip height without compromising lip width. Moreover, the modified rotation-advancement technique resulted in better aesthetic nasal outcomes. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.

Evaluation of late cleft palate repair by a modified technique without relaxing incisions.

OBJECTIVE: To evaluate the postoperative outcomes together with analyzing the associated influencing factors following a late cleft palate repair by the Sommerlad-Furlow modified technique (S-F). MATERIALS AND METHODS: In a retrospective cohort, 320 consecutive patients with cleft palate, who received S-F technique between 2011 and 2017, were reviewed. The patients were divided into three age groups, less than one year (143), one to two years (113), and greater than 2 years (64). The postoperative outcomes included wound healing (complete/fistula) and velopharyngeal function (VPF). RESULTS: The overall cleft width was 10 ± 3.07 mm. The overall rates of complete wound healing and proper velopharyngeal function were 96.6% and 81.56%, respectively. No significant difference was found between the age groups regarding wound healing, with an overall fistula rate of 3.4%. The VPF was significantly varied among the age groups (P<0.001). In context, the rates of velopharyngeal insufficiency (VPI) were 9.8%, 14.2%, and 45.4% among patients repaired at ˂1, 1-2, and >2 years old, respectively. The cleft type was the most potential factor associated with fistula. The age at repair was identified as the most implicating factor for VPI. CONCLUSIONS: The S-F technique had achieved low fistula rate and satisfactory speech outcome, especially in early repair group and even in the wide cleft palate. The older age at repair and severe cleft type had a major impact on the postoperative outcomes.

The Necessity of Nostril Retention Application After Secondary Unilateral Cleft Rhinoplasty.

BACKGROUND: This study aims to investigate the necessity of nostril retention after secondary unilateral cleft rhinoplasty. METHODS: Seventy four patients who underwent secondary unilateral cleft rhinoplasty were categorized into control group, nasal retainer group, and nasal clip group. A nasal retainer or nasal clip was applied 7 days after secondary correction and retained in the nostrils of the patients for 6 to 12 months. Measurements from pre- and post-operative photos and patient-reported outcomes were used in this study. RESULTS: After 6 to 12 months, although relapse still occurred in three groups, the nasal retainer group showed a better effect in the ratio of nostril height, whereas the nasal clip group showed a significant improvement in the ratio of nasal base. And both the two groups also showed significant improvement in the ratio of nasal columella. Patients from the control group generally had lower Derriford Appearance Scale (DAS) scores than the nasal retainer group and nasal clip group. Wearing a nasal retainer may negatively influence self-concept, facial self-consciousness of appearance and physical state, and significant differences in mean scores were also found in 9 items. CONCLUSIONS: The nostril retention after secondary unilateral cleft rhinoplasty could help preserve nasal morphology and reduce postoperative relapse but worsen the patients' quality of life. The necessity of applying the nostril retention should consider the forms of nasal deformity and the potential influence on the quality of life. LEVEL OF EVIDENCE: 3 Laryngoscope, 133:1618-1623, 2023.

Primary unilateral incomplete cleft lip repair by a modified rotational advancement technique.

PURPOSE: This study aimed to describe a modified technique for primary unilateral incomplete cleft lip repair together with postoperative outcomes assessment. STUDY DESIGN: A Retrospective study. PARTICIPANTS AND SETTING: Photos of 64 consecutive patients with nonsyndromic primary unilateral incomplete cleft lip were reviewed. Of the 64 participants for the study sample, 32 patients had received Millard rotational advancement technique (RA), while the other 32 had modified rotational advancement technique (MRA) with preserving the nasal sill intact. It was conducted at a university-affiliated tertiary hospital between 2013 and 2021. MAIN MEASURES: The lip measures were represented by lip height and width, vermillion height, midline-philtrum angle, and angle of Cupid's bow peaks. The nasal measures involved columella length and angle, nostril height and width, and ala width. Both descriptive and comparative data analyses were calculated. RESULTS: Symmetrical lip height, lip width, philtrum angle, Cupid's bow, as well columellar length, and alar width were obtained following the MRA technique. No significant difference was found between the MRA and RA groups concerning the preoperative lip height, Cupid's bow angle, columellar length and angle. However, the postoperative lip height, width and columellar length were greater in MRA group than RA group (P= .001, 0.004 and 0.002, respectively). On the other hand, the MRA group had significantly smaller columellar and Cupid's bow peaks angles than RA group (0.53±0.36 vs 1.21±0.91 and 1.34±1.84 vs 3.14 ± 2.97, respectively). CONCLUSIONS: The MRA technique has obtained satisfactory lip and nasal outcomes in terms of lip height, lip width, philtrum angle, Cupid's bow, columellar length, and alar width while keeping the nasal sill intact.

Tridimensional Analysis of Incisive Canal and Upper Central Incisor Approximation.

OBJECTIVE: The present study aimed to estimate the location of the incisive canal (IC) concerning the upper central incisor roots (U1) in order to explore the amount of incisor retraction as per the envelope of discrepancy amongst Chinese patients with different vertical facial growth patterns. METHODS: This is a cross-sectional study that used a total of 207 pretreatment cone-beam computed tomography (CBCT) scans of adults with a skeletal class I relationship. Sixty-nine cases were included in each of the normodivergent, hypodivergent, and hyperdivergent facial groups. The IC volume was measured using Mimics 21 software. The IC width and IC-U1 proximity were measured using in vivo 6 software. Linear measurements were conducted at 3 vertical levels. RESULTS: The IC has shown a larger volume in the hyperdivergent group and male patients. Overall, the IC has recorded linear width greater than the inter-root distance of U1 in 59.1%, 66%, and 68.8% amongst the normodivergent, hypodivergent, and hyperdivergent facial groups, respectively, and in 58.3% of males and 70.8% of females. The overall sagittal distances between the U1 and IC were 4.00 ± 0.82 mm, 4.60 ± 0.83 mm, and 3.60 ± 0.80 mm amongst the normodivergent, hypodivergent, and hyperdivergent facial groups, respectively. CONCLUSIONS: The maximum sagittal distances between U1 and IC were 4.8 mm, 5.4 mm, and 4.4 mm amongst the normodivergent, hypodivergent, and hyperdivergent facial groups, respectively. Thereby, our findings have revised the retraction aspect of the envelope of discrepancy as per the different vertical facial growth patterns, which could serve a reference for the clinical practice involved considerable incisors movement, especially among Chinese patients.

Immediate implant placement with simultaneous bone augmentation versus delayed implant placement following alveolar ridge preservation: A clinical and radiographic study.

OBJECTIVE: The present study aimed to evaluate the clinical and radiographic outcomes of immediate implant placement (IIP) with guided bone regeneration (GBR) as compared to delayed implant placement (DIP) following alveolar ridge preservation (ARP) and to identify the potential risk factors influencing these outcomes. METHODOLOGY: A total of 56 patients (IIP = 28 vs. DIP = 28) with class I or II bony defects received 56 implants were included. GBR procedure using Bio-Oss® bone substitute mixed with advanced platelet-rich fibrin (A-PRF) and covered by Bio-Gide® membrane and additional A-PRF membrane was performed either simultaneously with the IIP or earlier at the time of ARP in DIP. Clinical and 3-D radiographic analyses of bone level, thickness, and density were performed at three-time intervals (T1, immediately; T2, 6-7 months; and T3, 1.5 to 2 years post-implantation), corresponding to the neck, coronal, middle, and apex of implants. RESULTS: The survival rate was 100% in both groups. IIP showed significant favorable outcomes regarding distal marginal bone level (anterior maxilla, T1-T3) and neck and coronal horizontal facial bone thickness (HFBT) (posterior maxilla, T1; and anterior maxilla, T1-T3, respectively) compared to DIP. However, DIP showed significant facial bone density at the neck and coronal parts in the anterior maxilla (T1) and the coronal part in the posterior maxilla (T3). The facial marginal bone level change was positively correlated with HFBT change (P = 0.007), which is negatively correlated with the secondary implant stability (P = 0.019). The implant region (anterior or posterior maxilla) was the only factor affecting on Implant stability quotient value (ISQ) and change in HFBT (P Ë‚ 0.05). CONCLUSION: Overall, the IIP combined with GBR in the post-extraction sites with pre-implant class I or II bony defects had some favorable outcomes compared to DIP after ARP. However, the clinical outcomes, ISQ value, and changes in bone level, thickness, and density from T1-T3 were comparable.

The Sommerlad-Furlow Modified Palatoplasty Technique: Postoperative Complications and Implicating Factors.

OBJECTIVE: To explore the incidence of postoperative complications and investigate the impact of preselected factors on functional and quality of life outcomes following the Sommerlad-Furlow modified palatoplasty technique. STUDY DESIGN: Retrospective cohort. METHODS: A total of 429 patients with cleft palate, who received Sommerlad-Furlow modified technique between 2011-2017 were enrolled. The postoperative complications including oronasal fistula (ONF), velopharyngeal insufficiency (VPI), and inadequate quality of life (QOL) were collected. Data of preselected factors including gender, age at palatoplasty, cleft type, cleft width, palatal width, pharyngeal cavity depth, and operation duration were also collected. RESULTS: Among 429 patients, 40.1% were males whereas 59.9% were females. The mean age at palatoplasty was 1.23 ± 0.69 (0.42-4) years, and the average cleft width was 10.15 ± 2.95 (4-27) mm. The cleft types had recorded rates of about 6.8%, 69.5%, 17.7%, and 6.1% of Veau I, II, III, and IV, respectively. The overall incidence rates of ONF, VPI, and inadequate QOL were 2.3%, 19.4%, and 31.3%, respectively. In both the univariate and multivariate analyses, the cleft type was significantly implicated in ONF formation (p = 0.023 and 0.032, respectively) whereas the velopharyngeal function was impacted by the palatoplasty age (p Ë‚ 0.001). The receiver operating characteristic curve indicated that age of palatoplasty ≥1.3 years (area under the curve = 0.611, p = 0.002) was the cutoff value for predicting the incidence of VPI. CONCLUSIONS: The Sommerlad-Furlow modified technique appears to have appropriate postoperative outcomes, even in the wide cleft palate. The older age at palatoplasty has a major impact on the overall postoperative outcomes. LEVEL OF EVIDENCE: 4 Laryngoscope, 133:822-829, 2023.